    SiS IDE Driver Installation For OS/2
   ======================================
Method 1: ( Recommended )
===============================================
1. Place the "SiS Driver Installation CD" into
   your CD-ROM Drive.
2. Open OS2 Windows or OS2 Full Screen.
3. Change Drive to CDROM Drive.
4. Change Directory to \IDE\OS2.
5. Run INSTOS2.EXE
6. Reboot OS/2 system.
===============================================

Method 2:
===============================================
1. From the OS/2 desktop, open ^OS/2 system.
2. Open ^System Setup.
3. Click ^Device Driver Install.
4. Put the driver CD in CDROM.
5. Click Source directory ^Change button.
6. Select CDROM Drive.
7. Select ^IDE directory.
8. Select ^OS2 directory and click ^Set button.
9. Select ^Install.
10. Select ^Exit.
11. Select ^Yes.
12. Select ^OK.
===============================================

[Note 1] Default Transfer Mode is ^Master DMA Mode
[Note 2] Add /!M option after BASEDEV=SISIDE.ADD in
         CONFIG.SYS to disable ^Master DMA Mode
