  (1) The mainboard can uses two types of Flash ROM ---- 5 volt and 12 
      volt. Set the mainboard for either type with the "Flash ROM BIOS
      Jumper".
              
      P.S. (incorrect setting, the Flash EPROM won't be programed.)

  (2) Power-off your system, set "Flash ROM BIOS jumper" in a correct position.

  (3) Power-on your system from MS-DOS ( no CONFIG.SYS and AUTOEXEC.BAT files)

  (4) Type "AWDFLASH.EXE new_BIOS_file_name", then press "ENTER".


                              Warning !
                            =============

 Using incorrect BIOS file may cause the system can't reboot.



