
       		MSP5900-U  Modem
		================

   Section A: Important notice

   Section B: Installation of PCI modem drivers on  Windows 95 
              platform

   Section C: Installation of PCI modem drivers on  Windows 98 
              platform

   Section D: How to change the installed Com Port to other Com Port

   Section E: How to configure modem to work with DOS Box games or 
	      application

   Section F: Technical Support

------------------------------------------------------------------------------------------------- 
   Section A:   
   
   Important notice
   ================

   1.	For information how to use the AT command, please refer to file
	Atcomset.doc.

	
------------------------------------------------------------------------------------------------- 
   Section B:
	
   Installation of PCI modem drivers on  Windows 95 platform
   =========================================================
   1.   Win95 will automatically detect the PCI PnP Modem 
        and displays the 'New Hardware Found' dialog box.

   2.   Insert the installation disk.
   
   3.   Select the 'Driver from disk provided by Hardware manufacturer'
        option and click 'OK'.

   4.   Type D:\ in the combo box and click 'OK'.
	(Assuming the drive letter of your CDROM is D) OR
	A:\ (Assuming the driver letter of your floppy disk drive is A)


   Uninstallation
   ==============
   Go to 'Control Panel'. Double-click on 'HSP Modem'. Click on 'Uninstall' button
   and then 'OK' to uninstall the MSP5900-U Modem.


-------------------------------------------------------------------------------------------------
   Section C:

   Installation of PCI modem drivers on  Windows 98 platform
   =========================================================
   Installation of modem drivers in Win98 is similar to Win95. 

   1.   Windows 98 will automatically detect the PCI modem.  
	Click Next to continue.

   2.   Insert the installation disk.

   3.   Select 'Search for the best drivers for your device. (Recommended)'
        and click 'Next' to continue.

   4.   Enable 'CD-Rom drive' selection and click 'Next' to continue.
	If your installation disk is a floppy disk, then enable
	'floppy disk drives' selection and click 'Next'.

   5.   Modem Driver will be found on the installation disk. Click 'Next' 
	to continue.

   6.   Click 'Finish' to complete modem installation.

   7.   System will then automatically load all the necessary drivers and
        files needed.


   Uninstallation
   ==============
   Go to 'Control Panel'. Double-click on 'HSP Modem'. Click on 'Uninstall' button
   and then 'OK' to uninstall the MSP5900-U Modem.


-------------------------------------------------------------------------------------------------
   Section D:

   How to change installed Com Port to other Com Port
   ================================================

   To change to other com port, go to 'Control Panel'. Double-click on 
   'HSP Modem'. Click on the radio button corresponding to the Com Port 
   you want to change. Click 'Apply'. 


-------------------------------------------------------------------------------------------------
   Section E: 

   How to configure modem to work with DOS Box games or application
   ================================================================
   1.	Run Dosbox utility, Dosbox.exe located at Windows directory.
	Or click on Start > Run and then key in dosbox.exe.

   2.	Choose an IRQ . Make sure this IRQ is still available and
	not used up by other device. You can check this by clicking on 
	Start > Settings > Control Panel > System > Device Manager.
	Select Computer and then click on Properties. Those IRQ number
	shown is the one already used up. Once an IRQ is selected, select
	the corresponding com port but this com port must not be the one
	used in Windows. Normally it follows the below standard 
	for Dos Box game/application.
	
	com port	Corresponding IRQ no
	========	====================
	com1		IRQ4
	com2		IRQ3
	com3		IRQ4
	com4		IRQ3


   4.	In case your Dos Box game does not follow the above standard,
	please find out the IRQ corresponding to the com port you set
	from the game/application itself.

   5. 	Click 'OK' and restart the computer. Now you can play Dos Box
	games or use a Dos Box application but remember to set the com port 
	to what you have set in the Dosbox utility.

   Note : You don't have to use the Dosbox utility every time you want
      	  to play Dos Box game or use a Dos Box application. You just have 
     	  to remember the last settings in Dosbox utility and set it
	  accordingly.

-------------------------------------------------------------------------------------------------
   Section F:

   Technical Support 
   =================

        ***********************************************************
        *  In case you encounter any problem with our products,   *
        *  please quote the following model(s) when calling our   *
        *  Technical Support :                                    *
        *                                  MSP5900-U Modem 	  *
        *********************************************************** 


 
                         -------  The End  ---------

