==============================================================================
M64 Display Driver for Windows NT 4.0 v2.00                   16 December 1999
==============================================================================

Operating systems supported
===========================
Microsoft Windows NT 4.0 Server (with Service Pack 3 or greater)
Microsoft Windows NT 4.0 Workstation (with Service Pack 3 or greater)

File list
---------
NVOGLNT.DLL    - OpenGL driver
NVINSTNT.DLL   - Installation/uninstallation support file
NV4_DISP.DLL   - Display driver
NV4_DISP.INF   - Windows NT display driver information file
NV4_MINI.SYS   - Miniport driver
README.TXT     - The file you're reading


Easy Installation instructions
------------------------------

A SETUP.EXE installer was bundled in this CD to allow for easy installation
of the for the Graphics device.  To start the installation, select <Run> by
clicking on the <Start> button found on the left bottom corner of the screen.
Type "D:\WINNT4\SETUP" and press Enter key to start the installation of the
AGP driver.  Follow the on screen instruction to complete the installation.


Alternate Installation instructions (For Advance Users)
-------------------------------------------------------
Windows NT
----------
These drivers must be installed by a user with Windows NT Administrator
privileges.  Consult your system administrator or Microsoft Windows NT
User's Manual for more information on Administrator privileges.

1 Start Microsoft Windows NT 4.0.

2 Click the Start button on the control bar, point to Settings, and click
  Control Panel.

3 Double-click Display, click the Settings tab, click Display Type, then
  click "Change".

4 Insert the M64 Installation CD into the CDROM drive, then
  click "Have Disk".

5 Select or type the path to the CDROM drive, "WINNTX" directory, then 
  click "OK".

  Windows should find files for the M64. If Windows cannot 
  find the files, check that the path name for the CD is correct
  and that the correct CD is inserted in it. 

6 If Windows found the files, select "OK".

7 Click "yes" when Windows NT informs you that you are installing a third
  party driver and asks if you wish to proceed.

  Windows NT then copies the files to the hard disk.

8 Click "OK", click "Close", then click "Close".

9 Remove CD from the CDROM drive, then click "Yes" when Windows NT asks 
  if you wish to restart the computer.  



Uninstall instructions
======================

To uninstall the drivers:

1 Click the Start button, point to Settings, and click Control Panel.

2 Double-click Add/Remove Programs, select Control Freak, then
  click "Add/Remove".

6 Click OK when asked if you wish to restart the computer.



Technical Support 
=================
     

        ***********************************************************
        *  In case you encounter any problem with our products,   *
        *  please quote the following model(s) when calling our   *
        *  Technical Support :                                    *
        *                                M64 Graphic Accelerator  *
        *********************************************************** 


 
                         -------  Thank You  ---------

