ReadMe File for the PIIX4 (430TX) Patch (Windows 95) Version 1.4

July 29, 1997

I.  Introduction
================
In Windows 95 version OSR2.0 or earlier, the Univeral Serial Bus (USB)
and the PCI to ISA Bridge devices from the Intel 430TX chipset mainboard 
cannot be correctly recognised and the drivers for these devices were not
included too.  So after installation of the Windows 95, there will always
be a QUESTION MARK next to these 2 devices.  Indicating that the the driver
is not installed or the device is not working properly.

The problem is that Windows 95 OSR2.0 or earlier version, were released 
before the 430TX chipset hit the market.  So these earlier version of the 
OS, do not have the correct drivers build-in.

In order to resolve this problem, we are offering this patch program, to 
allow Windows 95 to correctly detect the devices.  After installing this 
program, you will find that both of these devices show they are working 
properly.


II. Files
=================
The files are:

--  README.TXT   - This ReadMe file.
--  PCHPIIX4.EXE - This Program file

III. Installation
=================
   Step 1.) Explore the PCHPIIX4.EXE.
   Step 2.) Run PCHPIIX4.EXE in Windows 95 environment.
   Step 3.) Select 'OK' to implement patch.
   Step 4.) Windows 95 will display messages as patch finished, Press 'OK' 
            button to reboot.
   Step 5.) When Windows 95 restarted, it will display messages that it had
            detected various new hardware components in the system, and
            proceed with its own installation procedure.  When prompted to
            restart Windows, click Yes to restart Windows. This may repeat
            for several times. Finally when Windows 95 complete its bootup
            procedure, check the Device Manager again.  You will see that
            all devices show it is working normally.
===========================================================
Copyright (c) 1997 Holco Enterprise Co., Ltd.
All Rights Reserved.
